-40%
Novus DigiRAIL-4C, DIN Rail mount, Four Counters/Digital Inputs, RS485 Output
Novus DigiRAIL-4C, DIN Rail mount, Four Counters/Digital Inputs, RS485 Output
Novus DigiRAIL-4C, DIN Rail mount, Four Counters/Digital Inputs, RS485 Output
Novus DigiRAIL-4C, DIN Rail mount, Four Counters/Digital Inputs, RS485 Output
Novus DigiRAIL-4C, DIN Rail mount, Four Counters/Digital Inputs, RS485 Output

Novus DigiRAIL-4C, DIN Rail mount, Four Counters/Digital Inputs, RS485 Output

$ 10.53

Availability: 15 in stock
  • Condition: Like New Condition
  • All returns accepted: Returns Accepted
  • Model: DigiRail-4C
  • Country/Region of Manufacture: Brazil
  • Brand: Novus
  • Item must be returned within: 30 Days
  • MPN: DigiRail-4C
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back

    Description

    Novus DigiRAIL-4C DIN Rail mount, Four Counters/Digital Inputs RS485 Output
    INTRODUCTION
    The Modbus Module for Digital Inputs - DigiRail-4C is an electronic unit with four digital counter inputs An RS485 serial interface allows reading and configuration of these inputs, through communication network. It's appropriate for mounting on DIN 35 mm rails. The  inputs  are  electrically  insulated  from  the  serial  interface  and  the  module  supply.  There  is  no  electrical  insulation between  serial  interface  and  supply.  There  is  no  electrical  insulation  between  the  inputs  1  and  2  (common  negative terminal), as well as between the inputs 3 and 4. Configuration  of  the DigiRail-4C  is  performed  through  the  RS485  interface  by  using  Modbus  RTU  commands.  The DigiConfig  software  allows  the  configuration  of  all  features  of  the DigiRail  as  well as its diagnostics. The DigiConfigoffers  features  for  detecting  the  devices  present  in  the  Modbus  network  and  for  configuring  the  communication parameters of the DigiRail-4C. This manual provides the instructions for installation and connection of the module. The installer for DigiConfig and the documentation  regarding  Modbus  communication  for  the DigiRail-4C  (Communication  Manual  of  the  DigiRail-4C)  are included in the CD-ROM which accompanies the product. They are also available for download at www.novus.com.br.
    SPECIFICATIONS
    Inputs: 4 Digital Inputs:  Logical level 0 = 0 to 1 Vdc; Logical level 1 = 4 to 35 Vdc
    Internal current limitation at the inputs: approximately 5 mA
    Maximum count frequency: 1000 Hz for signals with square wave and working cycle of 50%. Input 1 can be configured for counting signals of up to 100 kHz.
    Counting capacity (per input): 32 bits (0 to 4.294.967.295)
    Feed: 10 to 35 Vdc / 50 mA maximum. Internal protection against polarity inversion.
    Electrical insulation between inputs and supply/serial port: 1000 Vdc for 1 minute
    Serial communication: RS485 at two wires, Modbus RTU protocol.
    Configurable parameters: Communication speed: from 1200 to 115200 bps; Parity: even, odd or none
    Key  for  restoring  communication  parameters:  The  RCom  key,  at  the  front  panel,  will  set  the  device  in  diagnostics mode  (address  246,  baud  rate  1200,  parity  even,  1  stop  bit),  able  to  be  detected  and  configured  by  the  DigiConfig software.
    Frontal light indicators for communication and status:
    TX:   Signalizes that the device is sending data on the RS485 line;
    RX:   Signalizes that the device is receiving data on the RS485 line;
    Status: When  the  light  is  permanently  on,  this  means  that  the  device  is  in  normal  operation;  when  the  light  is flashing in a second interval (approximately), this means that the device is in diagnostics mode.
    Software configurator in Windows environment: DigiConfig
    Electromagnetic compatibility: EN 61326:2000
    Operating temperature: 0 to 70 °C
    Operational relative humidity: 0 to 90% RH
    Assembly: DIN 35 mm rail